EX-44042-2
PCIe 2S Serial RS-232 card (MosChip)
The EX-44042-2 PCI-Express I/O-adapter provides two high performance 16C550-type UART compatible RS-232 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI-Express Bus (PCI-e). The card is fully PCI-Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System).
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt setting from the operating system, IRQ sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 1.0a Specification
WHQL certified
Chipset: MosChip MCS9901CV
Packaging contents:EX-44042-2, Driver CD, Manual
EX-16415
PCIe FireWire 1394B card with 3+1 Ports (TI Chipset) incl. LowProfile Bracket
The PCI-Express FireWire 1394B (FireWire800) card provides two external and one internal FireWire 1394B port and one external 6-pin FireWire 1394A port. It was developed to expand PCs, workstations or servers with three additional FireWire 1394B and one FireWire 1394A high-speed port via the PCI Express bus. The EX-16415 provides a fast I/O solution to give the user the opportunity to connect fast peripheral devices. The EX-16415 comes with a low-profile bracket for narrow computer housings up to 8 cm in height.
Supports up to 63 devices
PCI Express interface compatible with 1.0a specification
"Hot swapping" devices can be plugged in and unplugged without turning off the computer
Can also be installed in addition to the mainboard FireWire ports
Supports PC and Apple Power MAC systems
Chipset: Texas Instrument XIO2213
Packaging content:EX-16415, Low Profile Bracket, Manual
EX-16600
PCIe FireWire 1394a card with 3+1 Ports (Via Chipset) incl. Low Profile Bracket
The EX-16600 PCI-Express FireWire 1394a (FireWire 400) card expands PCs, workstations or servers by three external FireWire 1394a ports (2x 6-pin, 1x 4-pin) and one internal 6-pin FireWire 1394a port. It thus enables the connection of FireWire devices such as video cameras or professional audio equipment. The EX-16600 comes with a low profile bracket for narrow computer cases up to 8 cm in height.
FireWire 1394a PCIe card with three external outputs and one internal output
Supports up to 63 devices
PCI Express interface compatible with 1.1 specification
"Hot swapping" devices can be plugged in and unplugged without turning off the computer
Can also be installed in addition to the FireWire ports from the motherboard
Active State Power Management (ASPM) for L0s and L1
Supports PC and Linux systems
Chipset: Via VT6315
Packaging content:EX-16600, IEEE 1394a cable, low profile bracket, manual
EX-44088
8S PCIe Serial RS-232 Board (SystemBase)
The EX-44088 PCI-Express I/O adapter provides 8 high performance 16C1050-type UART compatible RS-232 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI Express Bus (PCIe). The card is fully PCI Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It additionally provides +5V and +12V for a POS System (Power over System) to the 9 pin male serial connector.
Interface: RS-232 V.24
FIFO Buffer: 16C1050 with 256Byte
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
I/O addresses: Set from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 2.0a Specification
Chipset: SystemBase
Packaging contents:EX-44088, 1x Octopus cable, 16x nuts, Driver CD, Manual
EX-44354
4S Serial RS-232 PCIe card, POS configurable (FTDI Chipset)
The EX-44354 PCIe I/O card provides four serial RS-232 high-performance UART 16C550 outputs. It is designed to expand four additional serial ports for PCs, small workstations or servers via the PCIe bus. +5V and +12V are configurable on pin 9 of the serial connectors as POS system (Power over System). The card is fully Plug-and-Play compatible. The EX-44354 comes with a low-profile bracket for installation in narrow computer cases up to 8cm high.
Interface: RS-232 V.24
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
FIFO Buffer 16C550 with 16Byte
Full x1 PCI Express Throughput, 250Mbytes/sec
Fully Compliant with PCIe Base Specifications, Revision 1.0a
I/O addresses and interrupt are set from the operating system
Data bits: 7 and 8 / Stop bits: 1, 1.5, 2
Parity: none, even, odd, space and mark
Signal: RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Chipset: FTDI
Packaging contents:EX-44354, Octopus cable, Driver CD, Low Profile bracket, Manual
EX-44062
PCIe 2S Serial RS232 board incl. LP bracket (SystemBase)
The EX-44062 PCI-Express I/O-adapter provides two high performance 16C1050-type UART compatible RS-232 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI-Express Bus (PCI-e). The card is fully PCI-Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System). With the EX-44062 we include two Low Profile bracket for small computer case.
Interface: RS-232 V.24 with FIFO Buffer 16C1050 with 258Byte
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
PCIe Interface fully compliant with 1.0a up to 3.0 specification
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Supports Flow Control RTS/CTS and XON/XOFF
Supports +5V or +12V to the pin 9 from the serial male connector
Chipset: SystemBase SB16C1053APCI
Packaging contents:EX-44062, Low Profile bracket, Driver CD, Manual
EX-45034
4S Serial RS-232/422/485 PCIe card, POS configurable, (FTDI Chipset)
The EX-45034 PCI I/O card provides four serial RS-232, 422 and 485 high performance UART 16C550 outputs. It is designed to expand four additional serial ports for PC, small workstation or server via PCI or PCI-X bus. +5V and +12V are configurable on pin 9 of the serial connectors as POS system (Power over System). The card is fully plug-and-play compatible. It supports the ATTA Auto RS-485 transmitter features. Each port can be individually set to RS-232, 422 or 485.
Interface: RS-232 V.24 / RS-422 / RS-485
±15kV IEC1000-4-2 ESD prodtecion for RS232 I/O's
FIFO Buffer 16C550 with 16Byte
I/O addresses and interrupt are set from the operating system
Data bits: 7 and 8 / Stop bits: 1, 1.5, 2
Parity: none, even, odd, space and mark
Support ATTA Auto Transmitter
Termination RS-422/485 - 120 Ohm can be enabled- and disabled
Signal:
RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TxD+/-, RxD+/-) Fullduplex
RS-485 - 4 wire (TxD+/-, RxD+/-) Fullduplex
RS-485 - 2 wire (Data+/-, Data+/-) Halfduplex
Chipset: FTDI
Packaging contents:EX-45034, Slot adapter with 2x 9 pin male connector, Driver CD, Manual
EX-12004-2
USB 3.2 Gen 2x1 PCIe (x4) card with 4 USB-A-ports (Asmedia)
The EX-12004-2 USB 3.2 Gen 2x1 PCIe (Gen2x4) card provides four external super-speed+ USB 3.2 Gen 2x1 ports with USB-A connector. It is designed to connect four additional USB 1.1, to 3.2 end devices to your workstation, desktop or server. It supports USB 1.1 Low-Speed (1.5Mbps), Full-Speed (12Mpbs), USB 2.0 High-Speed (480Mbps), USB 3.2 Gen 1 Super-Speed (5Gbps) and USB 3.2 Gen 2x1 Super-Speed+ (10Gbps). It is the perfect technology for external storage, digital cameras, webcam, scanner and more. The EX-12004-2 supports 900mA current on the external USB 3.2 Gen 2x1 ports. Two Asmedia chipsets are used. One chip for every two ports.
USB 3.2 Gen 2x1 PCIe x4 card with four A-female connectors
Compliant with USB 3.2 Rev.1.0 and Intel xHCI Rev. 1.0 specification
Fully compliant with PCI Express Gen2 Specification
Compatible with USB Attached SCSI Protocol Rev. 1.0
Supports “Hot Swapping” and “Plug-and-Play”
Supports each A-port 900mA power
Supports up to 127 USB devices (USB1.1 up to USB 3.2 Gen 2x1)
Chipset: 2x Asmedia ASM3142
Packaging contents:EX-12004-2, Driver CD, Manual
EX-6070
PCI 10/100Mbps Ethernet card
The EX-6070 is a 10/100 Ethernet card designed for the PCI bus and fully compatible with IEEE 802.3/u. It supports a data transfer rate of up to 10 or 100Mbit per second. The EX-6070 supports Half and Full Duplex as well as NWay Auto-Negotiation to automatically adapt to the speed in the network (10/100 Mbit/s.). Furthermore, the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support for various operating systems.
Supports PCI Rev.2.3, 32-Bit, 33MH
Integrated Dual 10/100 Transceiver
Supports Crossover Detection & Auto-Correction (for Crossover cable)
Supports Pair Swap/Polarity/Skew Correction
Wake-on-LAN and Remote Wake-up Support
Supports Full Duplex Flow Control (IEEE 802.3x)
Supports IEEE 802.3, IEEE 802.3u
Supports optional Remotboot socket for 8KB, 16KB and 32KB chip
Activity LED to check the data transfer
Chipset: Realtek 8139D
Packaging contents:EX-6070, Low Profile bracket, Driver CD, Manual
EX-41054
PCI 4S Serial RS-232 card with Octopus cable (MosChip Chipset)
The EX-41054 PCI I/O card provides four serial RS-232 high performance UART 16C550 outputs. It is designed to expand four additional serial ports for PC, workstation or server via PCI or PCI-X bus. The card is fully plug-and-play compatible.
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Support mainboard with 5V and 3.3V
Windows WHQL certified
Chipset: MosChip MCS9845CV
Packaging contents:EX-41054, Octopus cable, 8x nuts, Driver CD, Manual
EX-1093-2
USB 3.2 Gen 1 PCI board with 4 ports incl. LP bracket (Renesas Chipset)
The EX-1093-2 USB 3.2 Gen 1 PCI card provides four external super-speed USB 3.2 Gen 1 ports. Designed to connect four additional USB 1.1, 2.0 or 3.0 end devices to your workstation, desktop or server, it supports USB 1.1 Low-Speed (1.5Mbps), Full-Speed (12Mpbs), USB 2.0 High-Speed (480Mbps) and USB 3.0 Super-Speed (5Gbps). It is the perfect technology for external storage, digital cameras, webcam, scanner and more. A low profile bracket is included with the EX-1093-2 for installation in narrow cases up to a maximum height of 8cm.
Compliant with USB 3.0 and Intel xHCI specification
Supports all USB compliant data transfer type such as Control/Bulk/Interrupt/Isochronous
Support up to 123 device
Support 32-Bit PCI-Bus and PCI-X 64-Bit with 5V and 3.3V
Support “Hot Swapping” and “Plug-and-Play”
Packaging contents:EX-1093-2, Low Profile bracket, Driver CD, Manual
EX-3650
PCIe (x4) controller to M.2 NGFF module incl. Low Profile bracket
With the EX-3650 controller you can add in your Computersystem a PCIe based (NVMe + AHCI) M.2 NGFF slot. You can use following M.2 NGFF module: 2280, 2260 and 2242. The EX-3650 need a PCI-Express x4 slot.
Convert M.2 NGFF PCIe SSD to work in main board PCIe x4 bus slot
Supports M.2 NGFF type 2280, 2260 and 2242 plated-hole with M-Key or B+M-Key based on PCIe
Supports NVM Express (NVMe)
Can be installed as boot drive
Transparent to the operating system and don’t need driver
Maximum high of 1.5mm component height on the top and bottom side
Supports dual-sided SSD module
Supports PCIe 1.0, 2.0 and 3.0 mainboard
Pin header on board for drive LED connection
Packaging contents:EX-3650, 1x screw for fix M.2 modules, Low Profile bracket, Manual
EX-6450
PCI FireWire 1394 card with 3 Ports incl. LP bracket (TI Chipset)
The PCI FireWire 1394A (FireWire400) card provides two external and one internal FireWire 1394A port. It is designed to add three additional FireWire 1394A high-speed ports for PCs, workstations or servers via the PCI bus to connect FireWire 1394A devices. The EX-6450 provides a high-speed I/O solution to enable users to connect fast peripherals. It also includes an internal motherboard compatible connector for FireWire front bay HUBs. Included with the EX-6450 is a low profile bracket for narrow computer cases up to 8 cm in height.
Supports up to 63 devices
PCI-Express interface compatible with 1.0a specification
"Hot swapping" devices can be plugged in and unplugged without turning off the computer
Can also be installed in addition to the FireWire ports from the motherboard
Supports PC and Apple Power MAC systems
Internal port is shared with the first external (P2) port
Supports 32-bit PCI bus and 64-bit PCI-X bus with 5V and 3.3V
Chipset: Texas Instruments TSB43AB22A
Packaging contents:EX-6450, Low Profile bracket, Manual
EX-41051
PCI 1S Seriell RS-232 card (MosChip Chipset) incl. LowProfile Bracket
The EX-41051 PCI I/O card provides a serial RS-232 high performance UART 16C550 output. It is designed to add another serial output for PC, workstation or server via PCI or PCI-X bus. +5V and +12V are configurable on pin 9 of the serial connector POS System (Power over System). A low profile bracket for narrow computer cases up to 8 cm in height is supplied with the EX-41051.
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Support mainboard with 5V and 3.3V
Windows WHQL certified
Chipset: MosChip MCS9820
Packaging contents:EX-41051, Low Profile bracket, Driver CD, Manual
EX-41150
PCI 2S Serial RS-232/1P Parallel Multi I/O card (MosChip)
The EX-41150 PCI Multi I/O adapter provides s high performance 16C550-type UART compatible RS-232 serial ports and one Parallel Centronics EPP/ECP port. It is designed for PC, thin client or server to provide instant COM and LPT port expansion via the PCI Bus. The card is fully PCI Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It additionally provides +5V and +12V via the pin 9 at the male connector for a POS System (Power over System).
Interface: Serial RS-232 V.24 / Parallel EPP/ECP
FIFO Buffer: 16C550 with 16Byte
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Support Mother-Board with 5V and 3.3V
Windows WHQL certified
Chip-Set: MosChip MCS9835CV
EX-6500E
PCI FireWire 1394 Karte mit 3+1 Ports (TI Chipset)
The EX-6500E FireWire 1394A (FireWire400) PCI card provides three external and one internal FireWire 1394A port. It is designed to expand four additional FireWire 1394A high-speed ports for PCs, workstations or servers via the PCI bus to connect FireWire 400 1394A devices.
Supports up to 63 devices
Compatible with IEEE 1394-1995, 1394a (rev. 1.1) and OHCI interface specification 1.0
"Hot swapping" devices can be plugged in and unplugged without turning off the computer
Can also be installed in addition to the FireWire ports from the motherboard
Internal port is shared with the first external (P3) port
Supports PC and MAC systems
Supports 32-bit PCI bus and 64-bit PCI-X bus with 5V and 3.3V
Packaging contents:EX-6500E, manual
EX-6606E
PCMCIA FireWire 1394 + USB2.0 + LAN 100Mbps
The EX-6605E 1394A (FireWire400) and USB 2.0 PCMCIA provides a reliable solution for Notebook computers to connect to FireWire 1394A and USB 2.0 peripherals over the PCMCIA Slots.
FireWire 1394A:PCMCIA 32-Bit FireWire IEEE 1394 CardBus with one port Supports up to 63 peripheral devices
USB 2.0:PCMCIA USB 2.0 CardBus with one port Integer dual-speed USB transceivers Support all USB 1.1 to 2.0 compatible peripheral device
Network:PCMCIA Network card with 10Base-T and 100Base-TX IEEE802.3, 802.3u protocol Automatically recognize of data transfer 10Mbps or 100Mbps
Packaging contents:EX-6606E, Driver CD, Manual
EX-44012
2P PCIe Parallel SPP board incl. Low Profile bracket (MosChip)
The EX-44012 PCI-Express Parallel adapter provides two SPP/EPP/ECP high performanceports. It is designed for PC, thin client or server to provide instant LPT port expansion via the PCI–Express Bus. The card is fully Universal PCI Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. With the included Low Profile Bracket the EX-44012 can also be used for small computer chassis of maximum 8 cm height.
PCI-Express x1 Parallel card with two ports
Interface: SPP (Standard Parallel Port)
I/O addresses and Interrupt setting from the operating system, IRQ sharing
Fully compliant with PCI-Express Base Specification Rev. 1.0a
Windows WHQL certification
Low Profile its included
Chip-Set: MosChip MCS9815CV
EX-40032
2S Serial RS-232 ISA 16-Bit Board
The EX-40032 ISA I/O card provides two serial RS-232 high performance UART 16C550 outputs. It is designed to extend two additional serial outputs for PC, workstation or server via the ISA bus. +5V and +12V on one pin of the 9 pin connector configurable for P.O.S systems (Power over System).
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
I/O addresses: 3F8, 2F8, 3E8, 2E8, 250, 258, 260
Interrupt: 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Packaging contents:EX-40032, Manual
EX-3503
PCIe eSATA 2 RAID 0/1 Controller for 2+2 HDD
The EX-3503 is a powerful SATA 2 RAID 0/1 controller that supports PCIe. It supports RAID 0 (stripping / speed) and RAID 1 (mirroring). The current data rate is 1.5Gb/s and 3.0Gb/s. The EX-3503 supports two internal and two external eSATA-2 ports. It is the right solution to connect SATA 3 devices to a PCIe slot
Fully PCI-Express Specifications 1.0a Compliant
Supports Legacy Command Queuing (LCQ), Supports Native Command Queuing (NCQ)
Co-resides with Motherboard IDE devices
ROM BIOS support RAID Setup and Boot Feature
Support hard drives greater then 137GB
Bootable
Chipset: SiL3132
Packaging contents: EX-3503, 2 x SATA cable, Driver CD, Manual
EX-1232
ExpressCard USB 3.2 Gen 1 with 2 Ports (NEC Chipset)
The EX-1232 USB 3.2 Gen 1 (previously called USB 3.0) ExpressCard card offer you two Super-Speed USB 3.2 Gen 1 ports. The EX-1232 it’s design for connect two more USB 1.1, 2.0 or 3.2 Gen 1 peripheral device. She support USB 1.1 Low-Speed (1.5Mbps), Full-Speed (12Mpbs), USB 2.0 High-Speed (480Mbps) and USB 3.2 Gen 1 Super-Speed (5Gbps). It is an ideal technology for external storage devices, digital cameras, webcams, scanners and much more. With the EX-1232 it’s included a ExpressCard Kit 34/54mm (EX-10000) what give the ExpressCard a lateral stability.
Compliant with USB 3.2 Gen 1 and Intel xHCI specification
Supports all USB Compliant Data Transfer Type such as Control/Bulk/Interrupt/ Isochronous
Support up to 123 device
Fully ExpressCard 1.0 compliant
Support “Hot Swapping” and “Plug-and-Play”
Chipset: NEC uPD720200
Packaging contents:EX-1232, ExpressCard (EX-10000), USB power cable, Driver CD, Manual
EX-41010
PCI 1P Parallel SPP/EPP/ECP Board (MosChip Chipset)
The EX-41010 PCI Parallel Card provides one parallel SPP/EPP/ECP high performance output. It is designed to add another parallel output for PC, workstation or server via the PCI Express bus. A low profile bracket is supplied with the EX-41010 for narrow cases up to max. 8cm height.
Universal PCI 32-Bit Parallel card with one port
Interface: SPP (Standard Parallel Port)
I/O addresses and Interrupt setting from the operating system, IRQ sharing
No Jumper Setting
Support mainboard with 5V and 3.3V
Chipset: MosChip MCS9805CV
Packaging contents:EX-41010, Low Profile bracket, Driver CD, Manual
EX-44343
2S Serial RS-232 / 1P Parallel Multi I/O PCIe card (MosChip)
The EX-44343 PCI Express I/O card provides two serial RS-232 high performance UART 16C550 and one parallel EPP/ECP output. It is designed to expand two additional serial outputs and one parallel Centronics output for PC, workstation or server via PCI Express bus. The EX-44343 comes with a LowProfile bracket, so the EX-44343 can be used in narrow cases up to a maximum height of 8cm. Additionally +5V or +12V on pin 9 of the connector is configurable for a POS system (Power over System).
Interface: Serial RS-232 V.24 / Parallel EPP/ECP
FIFO Buffer: 16C550 with 16Byte
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 1.0a specification
Chipset: ASIX/MosChip MCS9901CV
Packaging contents:EX-44343, Octopus cable, Low Profile bracket, Driver CD, Manual
EX-44044-2
PCIe 4S Serial RS-232 card, incl. Low Profile bracket (MosChip)
The EX-44044-2 PCI Express I/O card provides four serial RS-232 high performance UART 16C550 outputs. It is designed to expand four additional serial ports for PC, workstation or server via PCI Express bus. The card is fully PCI Express plug-and-play compatible and has no problems with IRQ and I/O address conflicts. Additionally, +5V or +12V on pin 9 of the serial connector is configurable for a POS system (Power over System). A low profile bracket is included with the EX-44044-2, for slim computer cases up to 8cm in height.
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt setting from the operating system, IRQ sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 1.0a Specification
WHQL certified
Chipset: MosChip MCS9904CV
Packaging contents:EX-44044-2, Octopus cable, Low Profile bracket, Driver CD, Manual