2S PCI Serial RS-422/485 Board Surge Protection & Isolation
Product number:
EX-42372IS
GTIN/EAN:
4718359427220
2S PCI Serial RS-422/485 Board Surge Protection & Isolation
The EX-42372IS Universal PCI I/O adapter provides two high performance 16C950-type UART compatible RS-422/485 serial ports with Surge Protection and Isolation. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI Bus. The card is fully PCI Plug-and-Play compatible and no IRQ and I/O address conflict problems. Support RS-485 Auto Transceiver turn around by unique feature ATTATM hardware. With the EX-42372IS also comes a LowProfile bracket, that can be used for small computer chassis with 8cm height like slim line PC.
- Interface: RS-422/485 with FIFO Buffer 16C950 and 128Byte
- ESD Surge Protection 15KV to all lines / Isolation 2.5KV
- I/O addresses: Setting from the operating system / Interrupt: Setting from the
System BIOS with Interrupt Sharing - Data Bits: 5, 6, 7, 8, 9 / Stop Bits: 1, 1.5, 2
- Parity: None, even, odd, space, mark
- Signal: Three modes are selectable:
- 4-Wire RS-422 (TXD+/-, RxD+/-) (Fullduplex)
- 4-Wire RS-485 (TxD+/-, RxD+/-) (Fullduplex)
- 2-Wire RS-485 (Data+/-, Data+/-) (Halfduplex)
- Support ATTA Auto Transmitter
- Terminator RS-422/485 120 Ohm can be enable– and disable
- Chip-Set: Oxford OXu16PCI952
| Bus system: | PCI |
|---|---|
| Interface: | RS-422/485 |
| Isolation: | 2.5KV |
| Mounting Type: | Standard / Low Profile |
| Number of ports: | 2 |
| Outputs: | 9-pin plug |
| Surge protection: | 15 KV ESD |