EX-41150
PCI 2S Serial RS-232/1P Parallel Multi I/O card (MosChip)
The EX-41150 PCI Multi I/O adapter provides s high performance 16C550-type UART compatible RS-232 serial ports and one Parallel Centronics EPP/ECP port. It is designed for PC, thin client or server to provide instant COM and LPT port expansion via the PCI Bus. The card is fully PCI Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It additionally provides +5V and +12V via the pin 9 at the male connector for a POS System (Power over System).
Interface: Serial RS-232 V.24 / Parallel EPP/ECP
FIFO Buffer: 16C550 with 16Byte
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Support Mother-Board with 5V and 3.3V
Windows WHQL certified
Chip-Set: MosChip MCS9835CV
EX-44343
2S Serial RS-232 / 1P Parallel Multi I/O PCIe card (MosChip)
The EX-44343 PCI Express I/O card provides two serial RS-232 high performance UART 16C550 and one parallel EPP/ECP output. It is designed to expand two additional serial outputs and one parallel Centronics output for PC, workstation or server via PCI Express bus. The EX-44343 comes with a LowProfile bracket, so the EX-44343 can be used in narrow cases up to a maximum height of 8cm. Additionally +5V or +12V on pin 9 of the connector is configurable for a POS system (Power over System).
Interface: Serial RS-232 V.24 / Parallel EPP/ECP
FIFO Buffer: 16C550 with 16Byte
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 1.0a specification
Chipset: ASIX/MosChip MCS9901CV
Packaging contents:EX-44343, Octopus cable, Low Profile bracket, Driver CD, Manual
EX-44140-2
2S Serial RS-232 / 1P Parallel Multi I/O PCIe card (MosChip)
The EX-44140-2 PCI Express I/O card provides two serial RS-232 high performance UART 16C550 and one parallel EPP/ECP output. It is designed to expand two additional serial outputs and one parallel Centronics output for PC, workstation or server via PCI Express bus. The card is fully PCI Express plug-and-play compatible and has no conflicts with IRQ and I/O addresses. Additionally, +5V or +12V on pin 9 of the connector is configurable for a POS system (Power over System).
Interface: Serial RS-232 V.24 / Parallel EPP/ECP
FIFO Buffer: 16C550 with 16Byte
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 1.0a specification
Chipset: MosChip MCS9901CV
Packaging contents:EX-44140-2, 25 pin slot adapter, Driver CD, Manual
EX-43360
PCI 2S Serial RS-232 / 1P Parallel Multi I/O incl. LP bracket (SystemBase)
The EX-43360 PCI I/O card provides two serial RS-232 high performance UART 16C1050 and one parallel EPP/ECP output. It is designed to add two more serial outputs for PC, workstation or server via PCI or PCI-X bus. +5V and +12V are configurable on pin 9 of the serial connector POS System (Power over System). The EX-43360 comes with a low profile bracket, so it can be used in narrow cases with a height of 8cm. Due to the Octopus cable the EX-43360 needs only one slot.
Serial Interface: RS232 V.24 with 16C1050 and 128Byte buffer
Parallel Interface: Parallel Centronics EPP/ECP/SPP
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt will set from the system BIOS, IRQ sharing
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Supports mainboards with 5V and 3.3V
Chipset: SystemBase 16C1053APCI
Packaging contents:EX-43360, Octopus cable, Low Profile bracket, Driver CD, Manual