EX-3503
PCIe eSATA 2 RAID 0/1 Controller for 2+2 HDD
The EX-3503 is a powerful SATA 2 RAID 0/1 controller that supports PCIe. It supports RAID 0 (stripping / speed) and RAID 1 (mirroring). The current data rate is 1.5Gb/s and 3.0Gb/s. The EX-3503 supports two internal and two external eSATA-2 ports. It is the right solution to connect SATA 3 devices to a PCIe slot
Fully PCI-Express Specifications 1.0a Compliant
Supports Legacy Command Queuing (LCQ), Supports Native Command Queuing (NCQ)
Co-resides with Motherboard IDE devices
ROM BIOS support RAID Setup and Boot Feature
Support hard drives greater then 137GB
Bootable
Chipset: SiL3132
Packaging contents: EX-3503, 2 x SATA cable, Driver CD, Manual
EX-3517
SATA 3 PCIe (x2) Controller for four HDD and SSD drives
The EX-3517 is a powerful SATA3 controller to connect SATA 2 / 3 and SSD hard drives via the PCI-Express Bus. It don’t supports RAID. The SATA3 bus speed is up to 6.0Gb/s. SATA3 is a high-speed serial link it replaces the parallel ATA standard. The EX-3517 supports 4 inter-nal SATA3 ports. It is the right solution to connect SATA3 devices via (x2).With the EX-3517 we include two low profile bracket for small computer case up to 8 cm.
Support 1-lane 5Gbps PCI-Express Gen2 Bus
Don’t supports RAID function
Compatible to SATA / SATA 2/3 and SSD drives
Co-resides with mainboard SATA devices
Support Serial ATA AHCI Spec. Rev. 1.3
Can also be used without RAID function for single HDD mode
Support hard drives up to 6TB
Bootable from the EX-3517
Chipset: ASMEDIA 1062 + JMicro JMB 575S
Packaging contents:EX-3517, 4x SATA3 cables, Low Profile bracket, Driver CD, Manual
EX-3519
SATA 3 PCIe (x1) Controller (Asmedia ASM1961) for two HDD and SSD drives
The EX-3519 PCIe card with the ASM1061 Chipset is a 2-channel expansion card. Each Serial ATA port supports transfer speeds up to 6Gbps and is backward compatible with older SATA 1.5Gbps or 3Gbps drives. In addition, the card supports the function between IDE or ACHI system with the mode switch. The EX-3519 is widely used in servers, personal computers, office computers, etc. A low profile bracket for narrow chassis up to 8cm height is supplied with the controller.
SATA 3 PCIe controller for 2 hard disks
Compliant with PCI Express Specification V2.0 and backward compatible with PCIe 1.x
Compliant with Serial ATA Specification v3.0
Hot Plug and Hot Swap
Support Native Command Queue (NCQ)
Support Port Multiplier
Support mode switching: IDE/NO BOOT/AHCI mode
Bootable from the EX-3519
Low Profile bracket included
Chipset Asmedia ASM1061
Packaging contents:EX-3519, 2x SATA3 cable, Low Profile bracket, Driver CD, Manual