EX-44042-2
PCIe 2S Serial RS-232 card (MosChip)
The EX-44042-2 PCI-Express I/O-adapter provides two high performance 16C550-type UART compatible RS-232 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI-Express Bus (PCI-e). The card is fully PCI-Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System).
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt setting from the operating system, IRQ sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 1.0a Specification
WHQL certified
Chipset: MosChip MCS9901CV
Packaging contents:EX-44042-2, Driver CD, Manual
EX-44088
8S PCIe Serial RS-232 Board (SystemBase)
The EX-44088 PCI-Express I/O adapter provides 8 high performance 16C1050-type UART compatible RS-232 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI Express Bus (PCIe). The card is fully PCI Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It additionally provides +5V and +12V for a POS System (Power over System) to the 9 pin male serial connector.
Interface: RS-232 V.24
FIFO Buffer: 16C1050 with 256Byte
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
I/O addresses: Set from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 2.0a Specification
Chipset: SystemBase
Packaging contents:EX-44088, 1x Octopus cable, 16x nuts, Driver CD, Manual
EX-44354
4S Serial RS-232 PCIe card, POS configurable (FTDI Chipset)
The EX-44354 PCIe I/O card provides four serial RS-232 high-performance UART 16C550 outputs. It is designed to expand four additional serial ports for PCs, small workstations or servers via the PCIe bus. +5V and +12V are configurable on pin 9 of the serial connectors as POS system (Power over System). The card is fully Plug-and-Play compatible. The EX-44354 comes with a low-profile bracket for installation in narrow computer cases up to 8cm high.
Interface: RS-232 V.24
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
FIFO Buffer 16C550 with 16Byte
Full x1 PCI Express Throughput, 250Mbytes/sec
Fully Compliant with PCIe Base Specifications, Revision 1.0a
I/O addresses and interrupt are set from the operating system
Data bits: 7 and 8 / Stop bits: 1, 1.5, 2
Parity: none, even, odd, space and mark
Signal: RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Chipset: FTDI
Packaging contents:EX-44354, Octopus cable, Driver CD, Low Profile bracket, Manual
EX-44062
PCIe 2S Serial RS232 board incl. LP bracket (SystemBase)
The EX-44062 PCI-Express I/O-adapter provides two high performance 16C1050-type UART compatible RS-232 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI-Express Bus (PCI-e). The card is fully PCI-Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System). With the EX-44062 we include two Low Profile bracket for small computer case.
Interface: RS-232 V.24 with FIFO Buffer 16C1050 with 258Byte
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
PCIe Interface fully compliant with 1.0a up to 3.0 specification
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Supports Flow Control RTS/CTS and XON/XOFF
Supports +5V or +12V to the pin 9 from the serial male connector
Chipset: SystemBase SB16C1053APCI
Packaging contents:EX-44062, Low Profile bracket, Driver CD, Manual
EX-45034
4S Serial RS-232/422/485 PCIe card, POS configurable, (FTDI Chipset)
The EX-45034 PCI I/O card provides four serial RS-232, 422 and 485 high performance UART 16C550 outputs. It is designed to expand four additional serial ports for PC, small workstation or server via PCI or PCI-X bus. +5V and +12V are configurable on pin 9 of the serial connectors as POS system (Power over System). The card is fully plug-and-play compatible. It supports the ATTA Auto RS-485 transmitter features. Each port can be individually set to RS-232, 422 or 485.
Interface: RS-232 V.24 / RS-422 / RS-485
±15kV IEC1000-4-2 ESD prodtecion for RS232 I/O's
FIFO Buffer 16C550 with 16Byte
I/O addresses and interrupt are set from the operating system
Data bits: 7 and 8 / Stop bits: 1, 1.5, 2
Parity: none, even, odd, space and mark
Support ATTA Auto Transmitter
Termination RS-422/485 - 120 Ohm can be enabled- and disabled
Signal:
RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TxD+/-, RxD+/-) Fullduplex
RS-485 - 4 wire (TxD+/-, RxD+/-) Fullduplex
RS-485 - 2 wire (Data+/-, Data+/-) Halfduplex
Chipset: FTDI
Packaging contents:EX-45034, Slot adapter with 2x 9 pin male connector, Driver CD, Manual
EX-41054
PCI 4S Serial RS-232 card with Octopus cable (MosChip Chipset)
The EX-41054 PCI I/O card provides four serial RS-232 high performance UART 16C550 outputs. It is designed to expand four additional serial ports for PC, workstation or server via PCI or PCI-X bus. The card is fully plug-and-play compatible.
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Support mainboard with 5V and 3.3V
Windows WHQL certified
Chipset: MosChip MCS9845CV
Packaging contents:EX-41054, Octopus cable, 8x nuts, Driver CD, Manual
EX-41051
PCI 1S Seriell RS-232 card (MosChip Chipset) incl. LowProfile Bracket
The EX-41051 PCI I/O card provides a serial RS-232 high performance UART 16C550 output. It is designed to add another serial output for PC, workstation or server via PCI or PCI-X bus. +5V and +12V are configurable on pin 9 of the serial connector POS System (Power over System). A low profile bracket for narrow computer cases up to 8 cm in height is supplied with the EX-41051.
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Support mainboard with 5V and 3.3V
Windows WHQL certified
Chipset: MosChip MCS9820
Packaging contents:EX-41051, Low Profile bracket, Driver CD, Manual
EX-40032
2S Serial RS-232 ISA 16-Bit Board
The EX-40032 ISA I/O card provides two serial RS-232 high performance UART 16C550 outputs. It is designed to extend two additional serial outputs for PC, workstation or server via the ISA bus. +5V and +12V on one pin of the 9 pin connector configurable for P.O.S systems (Power over System).
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
I/O addresses: 3F8, 2F8, 3E8, 2E8, 250, 258, 260
Interrupt: 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Packaging contents:EX-40032, Manual
EX-44044-2
PCIe 4S Serial RS-232 card, incl. Low Profile bracket (MosChip)
The EX-44044-2 PCI Express I/O card provides four serial RS-232 high performance UART 16C550 outputs. It is designed to expand four additional serial ports for PC, workstation or server via PCI Express bus. The card is fully PCI Express plug-and-play compatible and has no problems with IRQ and I/O address conflicts. Additionally, +5V or +12V on pin 9 of the serial connector is configurable for a POS system (Power over System). A low profile bracket is included with the EX-44044-2, for slim computer cases up to 8cm in height.
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt setting from the operating system, IRQ sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 1.0a Specification
WHQL certified
Chipset: MosChip MCS9904CV
Packaging contents:EX-44044-2, Octopus cable, Low Profile bracket, Driver CD, Manual
EX-44041-2
1S PCIe Serial RS-232 Board (MosChip)
The EX-44041-2 PCI-Express I/O-adapter provides one high performance 16C550-type UART compatible RS-232 serial port. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI-Express Bus (PCI-e). The card is fully PCI-Express Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System).
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt setting from the operating system, IRQ sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Interface: Fully compliant with 1.0a Specification
WHQL certified
Chipset: MosChip MCS9901CV
Packaging contents:EX-44041-2, Driver CD, Manual
EX-42372
2S PCI Serial RS-422/485 Board incl. LowProfile bracket
The EX-42372 Universal PCI I/O adapter provides two high performance 16C950-type UART compatible RS-422/485 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI Bus. The card is fully PCI Plug-and-Play compatible and no IRQ and I/O address conflicts. Support RS-485 Auto Transceiver turn around by unique feature ATTATM hardware. With the EX-42372 also comes a LowProfile bracket, that can be used for small computer chassis with 8cm height like slim line PC.
Interface: RS-422/485 with FIFO Buffer 16C950 and 128Byte
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8, 9 / Stop Bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Signal: Three modes are selectable:
4-Wire RS-422 (TXD+/-, RxD+/-) (Fullduplex)
4-Wire RS-485 (TxD+/-, RxD+/-) (Fullduplex)
2-Wire RS-485 (Data+/-, Data+/-) (Halfduplex)
Support ATTA Auto Transmitter
Terminator TS-422/485 120 Ohm can be enable– and disable
Chip-Set: Oxford OXu16PCI952
EX-42372IS
2S PCI Serial RS-422/485 Board Surge Protection & Isolation
The EX-42372IS Universal PCI I/O adapter provides two high performance 16C950-type UART compatible RS-422/485 serial ports with Surge Protection and Isolation. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI Bus. The card is fully PCI Plug-and-Play compatible and no IRQ and I/O address conflict problems. Support RS-485 Auto Transceiver turn around by unique feature ATTATM hardware. With the EX-42372IS also comes a LowProfile bracket, that can be used for small computer chassis with 8cm height like slim line PC.
Interface: RS-422/485 with FIFO Buffer 16C950 and 128Byte
ESD Surge Protection 15KV to all lines / Isolation 2.5KV
I/O addresses: Setting from the operating system / Interrupt: Setting from theSystem BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8, 9 / Stop Bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Signal: Three modes are selectable:
4-Wire RS-422 (TXD+/-, RxD+/-) (Fullduplex)
4-Wire RS-485 (TxD+/-, RxD+/-) (Fullduplex)
2-Wire RS-485 (Data+/-, Data+/-) (Halfduplex)
Support ATTA Auto Transmitter
Terminator RS-422/485 120 Ohm can be enable– and disable
Chip-Set: Oxford OXu16PCI952
EX-41388
PCI 8S Serial RS-232 card wit LP bracket (SystemBase)
The EX-41388 PCI I/O card provides eight serial RS-232 high performance UART 16C950 outputs. It is designed to add eight additional serial ports for PC, workstation or server via PCI or PCI-X bus. The card is fully plug-and-play compatible and supports Linux and SCO-Unix.
Interface: RS-232 V.24
FIFO Buffer: 161050 with 256Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Supports mainboards with 5V and 3.3V
Chipset: SystemBase 16C1058PCI
Packaging contents:EX-41388, Octopus cable, 16x nuts, Low Profile bracket, Driver CD, Manual
EX-41052-2
PCI 2S Serial RS-232 board incl. LP bracket (MosChip Chipset) incl. LowProfile Bracket
The EX-41052-2 PCI I/O card provides two serial RS-232 high performance UART 16C550 outputs. It is designed to add two more serial outputs for PC, workstation or server via PCI or PCI-X bus. +5V and +12V are configurable on pin 9 of the serial connectors POS System (Power over System). Two low profile brackets are included with the EX-41052-2 for narrow computer cases up to 8cm in height.
Interface: RS232 V.24
FIFO Buffer: 16C550 with 256Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt will set from the system BIOS, IRQ sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
+5V or +12V selectable to pin 9 for both serial male connectors
Supports mainboard with 5V and 3.3V
Chipset: MosChip MCS9865IV-AA
Packaging contents: EX-41052-2, 2x Low Profile bracket, Driver CD, Manual
EX-42374
PCI 4S Serial RS-232/422/485 Combo card (SystemBase)
The EX-42374 PCI I/O-adapter provides four high performance 16C1050-type UART compatible RS-232, 422 and 485 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI- or PCI-X Bus. The card is fully PCI Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. The EX-42374 support RS-485 Auto Tranceiver turn around by unique feature ATTA hardware. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System).
Interface: 4x RS-232 V.24, RS-422/485
FIFO Buffer: 16C1050 with 256Byte
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal:
RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
Support ATTA Auto Transmitter
Terminator TS-422/485 120 Ohm can be enabled- and disabled
Supports Mainboards with 5V and 3.3V
Chipset: SystemBase SB16C1054PCI
Packaging contents:EX-42374, Octopus cable, 8x nuts, Low Profile bracket, Driver CD, Manual
EX-42378
PCI 8S Serial RS-232/422/485 Combo card (SystemBase)
The EX-42378 PCI I/O-adapter provides eigth high performance 16C1050-type UART compatible RS-232, 422 and 485 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI- or PCI-X Bus. The card is fully PCI Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. The EX-42378 support RS-485 Auto Tranceiver turn around by unique feature ATTA hardware. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System).
Interface: 8x RS-232 V.24, RS-422/485
FIFO Buffer: 16C1050 with 256Byte
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Signal
RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
Support ATTA Auto Transmitter
Terminator TS-422/485 120 Ohm can be enabled– and disabled
Supports Mainoards with 5V and 3.3V
Chipset: SystemBase SB16C1054PCI
Packaging contents:EX-42378, Octopus cable, 16x nuts, Low Profile bracket, Driver CD, Manual
EX-41384
PCI 4S Serial RS232 board incl. LP bracket (SystemBase)
The EX-41384 PCI I/O card provides four serial RS232 high performance UART 16C1050 outputs. It is designed to expand four additional serial ports for PC, workstation or server via PCI or PCI-X bus. The card is fully plug-and-play compatible and supports Linux and SCO-Unix. The EX-41384 can also be installed in a low profile computer case with a maximum height of 8 cm. Additionally, +5V or +12V on pin 9 of the serial connector is configurable for a POS system (Power over System).
Interface: RS232 V.24
FIFO Buffer: 16C1050 with 256Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt will set from the system BIOS, IRQ sharing
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Flow Control RTS/CTS, XON/XOFF
Support mainboards with 5V and 3.3V
+5V or +12V selectable on pin 9 for all four male connectors
Packaging contents:EX-41384, Octopus cable, 8x nuts, Low Profile bracket, Driver CD, Manual
EX-47040P
PCI 8S up to 32S Serial RS-232/422/485 Metal box incl. LP bracket (SystemBase)
The EX-47040P PCI I/O module provides eight high performance 16C1050-type UART compatible RS-232, 422 and 485 serial ports. By each port you can select independent the interface type. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI- or PCI-X Bus. The card is fully PCI Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. The EX-47040P support RS-485 Auto Transceiver turn around by unique feature ATTA hardware. With the slave module EX-47049 it’s possible to add up to 32 ports. A Low Profile bracket for small computer cases is included.
Interface: 8x RS-232 V.24, RS-422/485 - independent mode selection
FIFO Buffer: 16C1050 with 256Byte
RS232 signal support 15KV ESD Surge Protection
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Support ATTA Auto Transmitter
Terminator RS-422/485 - 120 Ohm can be enable– and disable
Expandable up to 32 ports (optional with EX-47049)
Wall– and DIN-Rail mounting kit
Support TX and RX activity LED
Signal:
RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
Chipset: SystemBase
Packaging contents:EX-47040P, PCI adapter card, 44 pin cable, low profile bracket, wall mount and DIN-Rail Kit Driver CD, manual
EX-47045E
PCIe 8S Serial RS-232/422/485 Metal box incl. LP bracket (SystemBase)
The EX-47045E PCIe I/O module provides eight serial RS-232 , 422 and 485 high performance UART 16C1050 outputs. Each port can be independently set the interface type. It is designed to expand eight additional serial combo ports for PC, workstation or server via PCIe bus. The module is fully PCIe Vers. 1.0 to 3.0 plug-and-play compatible and has no conflicts with IRQ and I/O addresses. It supports the ATTA Auto RS-485 transmitter features. The EX-47045E can be expanded up to 32 ports with the EX-47049 add-on module. In addition, a low profile bracket is included for narrow PC chassis.
Interface: 8x RS-232 V.24, RS-422/485 - independent mode selection
FIFO Buffer: 16C1050 with 256Byte
RS232 signal support 15KV ESD Surge Protection
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Support ATTA Auto Transmitter
Terminator RS-422/485 - 120 Ohm can be enable– and disable
Expandable up to 32 ports (optional with EX-47049)
Wall– and DIN-Rail mounting kit
Supports TX and RX activity LED
Signal:
RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
Chipset: SystemBase
Packaging contents:EX-47045E, PCIe adapter card, 44 pin cable, Low Profile bracket, wall mount and DIN-Rail Kit Driver CD, manual
EX-47049
8S Serial RS-232/422/485 Expansion-Metal box for EX-47040P or EX-47045E
The EX-47049 expansion metal box provides eight RS-232 , 422 and 485 high performance UART 16C1050 serial outputs. Each port can be independently assigned the interface type. It is designed to expand eight additional serial combo ports on the EX-47040P or EX-47045E. It supports the ATTA Auto RS-485 transmitter features. With the slave module EX-47049 it is possible to extend the EX-47040P or EX-47045E up to 32 ports. No additional power supply is needed.
Interface: 8x RS-232 V.24, RS-422/485 - independent mode selection
FIFO Buffer: 16C1050 with 256Byte
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Support ATTA Auto Transmitter
Terminator RS-422/485 - 120 Ohm can be enabled- and disabled
Expandable up to 32 ports (optional with EX-47049)
Wall– and DIN-Rail mounting kit
Supports TX and RX activity LED
Signal:
RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
Packaging contents:EX-47049, Wall mount and DIN-Rail Kit Driver CD, manual
EX-45364
PCIe 4S Serial RS-232/422/485 inkl. Low Profile bracket (SystemBase)
The EX-45364 PCIe I/O card provides four RS-232, 422 and 485 high performance UART 16C1050 serial outputs. Each port can be independently configured as RS-232, 422 or 485. It is designed to add four more serial combo ports for PC, workstation or server via PCIe bus. The card is fully PCIe plug-and-play compatible and has no conflicts with IRQ and I/O addresses. It supports the ATTA Auto RS-485 transmitter features. In addition, +5V or +12V on pin 9 of the RS-232 serial connector is configurable for a POS system (Power over System). In addition, a low profile bracket is included for narrow PC chassis.
Interface: 4x RS-232 V.24, RS-422/485 - independent mode selection
FIFO Buffer: 16C1050 with 256Byte
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal:
RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
Support ATTA Auto Transmitter
Terminator RS-422/485 120 Ohm can be enabled and disabled
Chipset: SB16C1054PCI
Packaging contents:EX-45364, Octopus cable, Low Profile bracket, Driver CD, Manual
EX-45368
PCIe 8S Serial RS-232/422/485 board incl. LP bracket (SystemBase Chipset)
The EX-45368 PCI I/O-adapter provides eight high performance 16C1050-type UART compatible RS-232, 422 and 485 serial ports. By each port you can select independent the interface type. It is designed for PC, thin client or server to provide instant COM port expansion via the PCIe Bus. The card is fully PCIe Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. The EX-45368 support RS-485 Auto Transceiver turn around by unique feature ATTA hardware. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System). Also it’s included a Low Profile bracket for small computer case.
Interface: 8x RS-232 V.24, RS-422/485 - independent mode selection
FIFO Buffer: 16C1050 with 256Byte
±15kV IEC1000-4-2 ESD Schutz for RS232 I/O's
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
Support ATTA Auto Transmitter
Support PCIe slot version 1.0 to 3.0
Terminator RS-422/485 120 Ohm can be enable– and disable
Signal:
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
Chipset: SystemBase SB16C1058PCI
Packaging contents:EX-45368, Octopus cable, Low Profile bracket, Driver CD, Manual
EX-44342
2S Serial RS-232 PCIe card (ASIX Chip)
The EX-44342 PCI-Express I/O-adapter provides two high performance 16C550-type UART com-patible RS-232 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI-Express Bus (PCI-e). The card is fully PCI-Express Plug-and-Play compati-ble and there are no IRQ and I/O address configuration problems. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System). With the EX-44372 we include a Low Profile bracket for small computer case up to 8cm high.
Interface: RS-232 V.24 / FIFO Buffer: 16C550 with 16Byte
±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
PCIe Interface fully compliant with 1.0a up to 3.0 specification
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Supports Flow Control RTS/CTS and XON/XOFF
Supports +5V or +12V to the pin 9 from the serial male connector
Packaging contents:EX-44342, Octopus cable, Driver CD, Low Profile bracket, Manual
EX-41016-2
PCI 16S Serial RS232 board incl. LP bracket (SystemBase)
The EX-41016-2 PCI I/O card provides sixteen serial RS232 high performance UART 16C1050 outputs. It is designed to expand sixteen additional serial ports for PC, workstation or server via PCI or PCI-X bus. The card is fully plug-and-play compatible and supports Linux and SCO-Unix. The EX-41016-2 can also be installed in a low profile computer case with a maximum height of 8 cm. Additionally, +5V or +12V on pin 9 of the serial connector is configurable for a POS system (Power over System).
Interface: RS232 V.24
FIFO Buffer: 16C1050 with 256Byte
±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
I/O addresses and Interrupt will set from the system BIOS, IRQ sharing
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Flow Control RTS/CTS, XON/XOFF
Support mainboards with 5V and 3.3V
Can select +5V or +12V to pin 9 from all 16 male connectors
Chipset: SystemBase 16C1054PCI
Packaging contents:EX-41016-2, 2x Octopus cable, 32x nuts, Low Profile bracket, Driver CD, Manual