The EX-3465 1-to-4 SATA 3 Switch is designed to provide a high performance link between a single SATA 3 host port and 4 SATA 3 devices ports. It connects the host upstream port to one of the 4 downstream SATA 3 hard drive or SSD drive (one device at the same time). It is done by simply pressing the push button switch. It only allowed the selected device to be powered and cut off the powers of the other unselected devices. This will reduce the power consumption and make sure those devices are true off line to prevent from any accidental erasing data by virus or application software. The EX-3465 provides a keylock switch to prevent from any unauthorized changing the settings. It helps home of school users to manage the devices easily. !! Attention !!The switching of hard disk during the operation, work only when the mainboard include Chipset what support “Hot Plug and Play” for example Silicon Image 3132. With our controller EX-3516 or EX-3501 the SATA switch works fine. Switch with 1 Upstream to 4 Downstream SATA 3 or SAS ports Support hard drives up to 6TB 3.5 or 5.25-inch Bay Form Factor, Easy to Fit in Normal PC Systems Built-in High Speed SATA Signal Switch, save the Current Settings by Built-in EEPROM Keylock to Prevent from Unauthorized Changing Provides LEDs to Indicate the Active Drive Completed cable set fort 4 SATA 3 drives will be included Chipset: Silicon Image SIL-3726 Packaging contents:EX-3465, 4x SATA cable set, 5 1/4" frame, Manual

The EX-3455 Hardware RAID controller is designed to easily upgrade their existing or new system with a RAID 1 or 0. The installation it’s very easy. Both hard disk and the mainboard are connected to the EX-3455. In a existing operating system, the data from the hard disk 0 are copy in the background automatically to the hard disk 1. In this time you can works normal. With a new installation from a operating system, the data are copy in the same time without loss of speed to the two hard drives. The EX-3455 can install in a 3.5 or 5.25-inch front bay or in one PCI-Express Slot. With the LowProfile bracket the EX-3455 you can use also in a small computer case with a maximal high of 8cm. The EX-3455 don't need driver or software and can use for all Operating system. 1-to-2 SATA 2 hardware RAID 0/1 for two SATA 2 hard drives Supports RAID 0, 1, LARGE and EZ-RAID 1 modes and set by DIP switches RAID 1 supports Auto Re-build in Background 3.5 or 5.25-inch Bay Form Factor, easy to fit in normal or small PC systems Supports over 2TB hard drives LEDs to indicate the RAID and Drive status Completed set of cables (SATA 2 and Power), incl. standard and low profile bracket For all Operating System Packaging contents:EX-3455, 3x SATA2/3 cables, 1x power cable, 3 1/2" and 5 1/4" frames, standard and Low Profile bracket, manual

The EX-1111 can be used to protect unused USB 3.0 or 2.0 A-sockets against dirt or other influences. The EX-1111 is pushed into the A sockets and ensure that no foreign objects or dust can penetrate. If necessary, the protective caps are simply pulled off again. Features: Protection Cap for USB 3.0 or 2.0 A-Female connector Easy to install and remove Protects against dust, dirt and water splashes Specifications: Hardware system: For all USB 3.0 or 2.0 A-female connector Material: hard plastic Operating Temperature : 320 up to 1310 Fahrenheit Storage Temperature: -400 up to 1670 Fahrenheit Rel. Humidity: 5% to 95% Weight: 100 g Packaging contents:10x EX-1111

The EX-3466-2 1-to-4 SATA 3 and 2 Switch is designed to provide a high performance link between a single SATA 3 host port and up to 4 SATA 3 or 2 devices ports. It connects the host upstream port to up to four of the 4 downstream SATA 3 or 2 devices (expand 1 port into 4 ports that can be used at the same time). It is done by simply pressing the push button switch. It powers the active devices and cut off the powers of the inactive devices. This will reduce the power consumption and make sure those devices are true off line to prevent from any accidental erasing data by virus or application software. The EX-3466-2 provides a keylock switch to prevent from any unauthor-ized changing the settings. It helps home of school users to manage the devices easily. !! ATTENTION !!The switching of hard disk during the operation, work only when the mainboard include Chipset what support “Hot Plug and Play” for example Silicon Image 3132. With our controller EX-3517 the SATA 3 switch works fine.  Expansion-Switch with 1 Upstream up to 4 Downstream SATA 3 and 2 ports Support hard drives up to 6TB 3.5 or 5.25-inch Bay Form Factor, Easy to Fit in Normal PC Systems Built-in High Speed SATA 2 Signal Switch Save the Current Settings by Built-in EEPROM Keylock to Prevent from Unauthorized Changing Provides LEDs to Indicate all Active Drive Completed cable set for 4 SATA 3 drives will be included Packaging contents:EX-3466-2, 4x SATA cable set, 5 1/4" frame, Manual

With the EX-1114-R you can lock unused USB A sockets to prevent unauthorized insertion of USB peripherals and also to protect against dust, dirt and water. The EX-1114-R is simply plugged onto the A-sockets and locked with the included special key. Lockable protective cover for USB A sockets Easy to install as well as remove Protects against dust, dirt, water splashes and unauthorized insertion of peripherals Delivery contents:1x key, 4x lock red Optionally available:EX-1114-RL: additional red lock

The EX-1115 can be used to protect unused RJ-45 jacks against dirt or other influences. The EX-1115 is pushed into the RJ-45 sockets and ensures that no foreign bodies or dust can penetrate. When needed, the protective caps are simply pulled off again. Features:Protective cover for RJ-45 jacksEasy to install as well as removeProtects against dust, dirt and water splashes Specifications:Hardware System: For all RJ-45 jacksMaterial : Hard plasticOperating temperature : 0°C to 55°C CelsiusStorage temperature: -40°C to 75°C CelsiusRel. humidity: 5% to 95%Weight: 100 g Scope of delivery:10x EX-1115

Additional lockable USB-A cover latch for EX-1114-R Lockable protective cover for USB A sockets Easy to install and remove Protects against dust, dirt, water splashes and unauthorized insertion of peripherals Notice:For use, the article EX-1114-R is required because there is the key for the locks included Delivery contents:10x USB Lock red