It can connect all different USB 2.0 devices such as Printer, scanner, USB stick, etc., with a speed up to 480Mbit/s over a distance up to 50 meters. There are is no limitation of USB devic-es. It is easy to install and requires no drivers or software. With a Cat.5/5e or 6 network cable, you can bridge over a distance of up to 50 meters between your computer (PC or MAC) and four USB peripheral device. The transmitter of the extender is connected directly to the computer and the USB device directly to the receiver. However, it has only ever a Computersystem on the USB peripheral device access.  True plug and play, no driver installation required Extends USB 2.0 high-speed and USB 1.1 (low-speed, full speed) devices up to 50 meter (164ft) over Cat. 5 / 5e / 6 cables Ideal for a wide variety of USB devices, from printers, scanners, hard drives, and audio devices, touch screens, web cams, and game controllers Fully Compliant with USB specification 1.1 and 2.0 External power supply for the transmitter is supplied Packaging contents:EX-1446, Power Supply 24V/0.5A, Manual

The EX-6300MM RS-232 to Fiber Optic Converter is designed to extend RS232 signals over optical fiber. It provides the most versatile connection possible between any asynchronous RS-232 equipments using fiber optic cable. The optical fiber isolates the data signals from ground potential, ground loops and provides EMI/RFI protection. The  EX-6300MM is capable of handling data rates up to 921.6Kbps. The product supports mixed standards, allowing you to replace other converters and isolators and add the EMI / RFI Protection inherent to fiber optic communications. The fiber optic connections are via two female SC connectors. RS232 connections use a DB9 male connector. Typically, an external 12V DC power supply is required. In case of the pin 9 of the RS232 connector supplies 12V, the unit will work without any external AC adapter. The EX-6300MM is easy to install. It eliminates the harmful effects of RF radiation and susceptibility to electromagnetic radiation. It is ideal for most of the applications requiring very secure serial port environments. Convert with 1 x RS-232 port over Fiber Optical Fiber Optic: SC, Multi Mode, 850nm, Duplex RS-232 signal - TXD, RXD and GND Cable Requirements: Multi Mode, 50/125, 62.5/125 oder 100/140μm Optical Fiber: Connector SC Transmission Distance: 2Km Wavelength: 850nm TX Output: > -14dBm, RX Sensitivity: -25dBm Compact Size

The EX-6300SM RS-232 to Fiber Optic Converter is designed to extend RS232 signals over optical fiber. It provides the most versatile connection possible between any asynchronous RS-232 equipments using fiber optic cable. The optical fiber isolates the data signals from ground potential, ground loops and provides EMI/RFI protection. The EX-6300SM is capable of handling data rates up to 921.6Kbps. The product supports mixed standards, allowing you to replace other converters and isolators and add the EMI / RFI Protection inherent to fiber optic communications. The fiber optic connections are via two female SC connectors. RS232 connections use a DB9 male connector. Typically, an external 12V DC power supply is required. In case of the pin 9 of the RS232 connector supplies 12V, the unit will work without any external AC adapter. The EX-6300SM is easy to install. It eliminates the harmful effects of RF radiation and susceptibility to electromagnetic radiation. It is ideal for most of the applications requiring very secure serial port environments. Fiber Optic: SC, Single Mode, 1310nm, Duplex RS-232 signal - TXD, RXD and GND Cable Requirements: Singel Mode, 8.3/125, 8.7/125, 9/125 oder 10/125μm Optical Fiber: Connector SC Transmission Distance: 20Km Wavelength: 1310nm TX Output: > -12dBm, RX Sensitivity: -25dBm Compact Size

It can connect all different USB 2.0 devices such as Printer, scanner, USB stick, etc., with a speed up to 480Mbit/s over a distance up to 50 meters. There are is no limitation of USB devices. It is easy to install and requires no drivers or software. With a Cat.5/5e or 6 network cable, you can bridge over a distance of up to 100 meters between your computer (PC or MAC) and four USB peripheral devices. The transmitter of the extender is connected directly to the computer and up to four USB device directly to the receiver. However, it has only ever a Computersystem on the USB peripheral device access. True plug and play, no driver installation required Extends USB 2.0 high-speed and USB 1.1 (low-speed, full speed) devices up to 50m over Cat. 5 / 5e / 6 cables Supports all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480Mbps Ideal for a wide variety of USB devices, from printers, scanners, hard drives, and audio devices, touch screens, web cams, and game controllers Fully Compliant with USB specification 1.1 and 2.0 Plastic housing External power supply for the receiver is supplied Chipset: LG 8311 Packaging contents:EX-1445, Power Supply 5V/2A, Manual

The EX-47951 RS-232 Extender can be used for any PC, workstation or server with an RS-232 interface. It is equipped with a 9 pin female connector that you can connect directly to your RS-232 serial port. It extends the RS-232 signals up to a maximum length of 1200 meters. For the transmission between the master and slave a Cat. 5 network cable is needed. Serial Port: Extender for the RS-232 signal up to 1200 meters with 115Kbps Parity: None, Odd, Even, Mark, Space Data Bits: 5, 6, 7, 8 Stop Bits: 1, 2 RS-232 Pins: RX, TX, GND, RTS, CTS RJ-45 Port: Power: DC 12 to 24V, 90mA Compatible with all RS-232 protocols Full-duplex Data Communication Pure hardware solution  real-time Data Transfer No Software configuration Packaging contents:EX-47951, 1x Master, 1x Slave, DIN-Rail Kit power supply 12V/1A, Serial cable, Manual

It can connect all different USB 2.0 devices such as Printer, scanner, USB stick, etc., with a speed up to 480Mbit/s over a distance up to 50 meters. There are is no limitation of USB devic-es. It is easy to install and requires no drivers or software. With a Cat.5/5e or 6 network cable, you can bridge over a distance of up to 50 meters between your computer (PC or MAC) and a USB peripheral device. The transmitter of the extender is connected directly to the computer and the USB device directly to the receiver. However, it has only ever a Computersystem on the USB peripheral device access.  True plug and play, no driver installation required Extends USB 2.0 high-speed and USB 1.1 (low-speed, full speed) devices up to 50 meter (164ft) over Cat. 5 / 5e / 6 cables Ideal for a wide variety of USB devices, from printers, scanners, hard drives, and audio devices, touch screens, web cams, and game controllers Support PoE with 5V/150mA power to the USB peripheral device For PoE function pleas use Cat6 cable only and the distance supported is depend on the quality of Cat6 cable Fully Compliant with USB specification 1.1 and 2.0 External power supply for the receiver is supplied Packaging contents:EX-1441-2, Power Supply 5V/2A, Manual

The EX-47960 RS-232 extender (extension) can be used for any PC, workstation or server with an RS232 interface. It is equipped with a 9 pin female connector that you can connect directly to your RS-232 serial port. It extends the RS-232 signals up to a maximum length of 50 meters. A Cat. 5 or 6 network cable is required for transmission between the transmitter and receiver. The EX-47960 operates without a power supply and the thumbscrews can be removed without tools and replaced with the supplied nuts. Serial Port: Extender for the RS-232 signal up to 50 meters with 921.6Kbps Parity: None, Odd, Even, Mark, Space Data Bits: 5, 6, 7, 8 Stop Bits: 1, 2 RS-232 Pins: RX, TX, GND, RTS, CTS  RJ-45 Port: Compatible with all RS-232 protocols Full-duplex Data Communication Pure hardware solution, real-time Data Transfer No software configuration No power supply needed Packaging contents:EX-47960, 1x Master and 1x Slave, Screw Nuts, Manual

The EX-47961 RS-232 DTE to DTE extender (extender) can be used for any PC, workstation or server with an RS232 interface. The EX-47961 can be used to connect two computers (DTE to DTE) together. It is equipped with 9 pin female connectors that can be directly connected to the RS-232 serial ports of the PC. It extends the RS-232 signals up to a maximum length of 50 meters. A Cat. 5 or 6 network cable is required for transmission between the transmitter and receiver. The EX-47961 works without a power supply. The thumbscrews can be removed without tools and replaced with the supplied nuts. Serial Port: Extender for the RS-232 signal up to 50 meters with 230.4Kbps Parity: None, Odd, Even, Mark, Space Data Bits: 5, 6, 7, 8 Stop Bits: 1, 2 RS-232 Pins: RX, TX, GND, RTS, CTS  RJ-45 Port: Compatible with all RS-232 protocols Full-duplex Data Communication Pure hardware solution, real-time Data Transfer No software configuration No power supply needed Packaging contents:EX-47961, 1x Master and 1x Slave, Screw Nuts, Manual

The EX-1448MM USB 3.2 Gen 1 Extender is designed to extend USB 3.2 Gen 1 signals (note: not backward compatible with USB 2.0/1.1) over fiber optic cables up to 300 meters (or 10 km with single mode transceivers). It consists of a local host unit connected to the PC and a remote 2-port SuperSpeed hub for USB devices. The hub provides one USB-A and one USB-C port. In some applications that rely on long distance and power such as cameras, storage units, etc., the EX-1448MM provides a reliable solution that fully meets the requirements! In particular, the DIN rail kit and wall mount with vertical or horizontal orientation provides various ways to mount the device accordingly in your application field. It also supports screw-lock cables to make the connection secure. All USB ports have been designed with 15KV ESD surge protection. Please note that EX-1448MM works perfectly with USB 3.2 Gen 1 or higher, but not with USB2.0/1.1 host PC or USB2.0/1.1 devices. In this case a super fast TT (Translation Translator) adapter is required for example the EX-11092-2 or EX-12003. Complies with USB specification 3.2 Gen 1 MSA compliant, SFP+ specification SFF-8431 SFP+ slot supports both multimode and singlemode optical transceivers Consists of 2 units: a local USB3.2 Gen 1 host-to-fiber unit and a remote fiber-to-USB 3.2 Gen 1 end-device hub unit Hub for remote devices, supports 1x USB-A port and 1x USB-C port, both support screwable USB cables Local host unit supports one USB-B port with screw-locking feature Compact metal chassis, DIN-Rail Kit and wall mount bracket with horizontal and vertical orientation Supports 5 Gbps (SuperSpeed), does NOT support 480 Mbps (high-speed) or lower speed devices Supports 15KV level 4 ESD protection for each port Remote device hub receiver require 5V DC input power (included), local transmitter unit does not require power. Also available: EX-1448SM with singlemode transceivers up to 1 km Packaging contents:1x Transmitter and 1x Receiver, USB 3.2 Gen 1 cable A-to-B 1.5m, Wall Mount and DIN-Rail Kit, Power Supply 5V/2A, Manual