The EX-6081 is a 2.5 Gigabit Ethernet card designed for the PCIe bus. It supports a data transfer rate of up to 2.5Gbit per second.The EX-6081 supports Half and Full Duplex as well as NWay Auto-Negotation to automatically adapt to the speed in the network (10/100/1000/2500 Mbit/s.). Furthermore, the card is equipped with Auto-MDI/MDI-X. In addition, it offers a very wide support of various operating systems. A low profile bracket is supplied with the card for installation in a narrow PC housing. Supports 10/100/1000/2500 Base-T Ethernet standards Supports 1-Lane 2.5/5Gbps PCI Express bus Fully Compliant with PCI Express version 2.1 bus Supports 2.5G Lite (1G data rate) mode Supports Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew correction Auto-Negotiation with Extended Next Page capability (XNP) Supports Auto-MDI/MDI-X Auto (for Crossover cable) Hardware ECC and CRC function Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE) Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload (Large send and Giant send) support Supports IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN and IEEE 802.1ad Double VLAN Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging Supports Virtual Machine Queue (VMQ) for Windows Server Hyper-V Installed Systems Wake-on-LAN and ‘RealWoW!’ Technology (remote wake-up) Activity LED data transfer mode Supports Low Profile for small Computer case up to 8cm high Chipset: Realtek RTL8125B Packaging contents:EX-6081, Low Profile bracket, Driver CD, Manual

With the EX-6007PoE, end devices such as IP-telephones, IP-cameras, WLAN access points, etc. can be supplied with a voltage of 56V. The EX-6007PoE steps up a common 12-24VDC power input to 56VDC for PoE power source. With its small size, the PoE solution is not only easy to use but easy to install in hard-to-reach places. The EX-6007PoE operates as power source equipment (PSE) = 34.20 W for the powered device (PD) = 25.50 W. It provides the user with greater installation flexibility since the end device no longer has to be in the immediate proximity of an outlet. Using IEEE 802.3af/at Power over Ethernet (PoE), the EX-6007PoE eliminates the need for a nearby power outlet and provides a reliable and user-friendly networking solution. This preserves the user's investment in LAN and Internet applications. Provides power to remote network devices Support 10/100/1000 Base-T Ethernet standard Fully IEEE 802.3af/at compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W Maximum Power Delivered (PD): Type 1 = 12.95W / Type 2 = 25.50W LED indicator for PoE power supply status Built in step-up converter from 12~24 VDC to 56 VDC Power Input: 12 V (DC Jack or Terminal Block) Built in isolated DC to DC converter Wall or DIN-Rail mounting Slim, rugged metal housing for critical applications Package Contents:EX-6007PoE, Power Supply 12V/3A, DIN-Rail Kit, Manual

The EX-6003HMVS is the ideal solution for instantly sharing USB devices over a network or the Internet. The USB server has four USB 2.0 ports with a data rate of 480 Mbps. The RJ45 Ethernet port provides a versatile network connection for smooth communication between devices. Built to last, the EX-6003HMVS has a robust metal casing with wall mounting brackets to ensure optimum performance in harsh environments, and is supplied with a DIN-Rail kit. Its innovative networking protocols emulate USB over TCP socket and integrate remote USB devices as if they were locally connected to the host PC, providing unrivalled convenience and flexibility. The EX-6003HMVS provides 15KV ESD surge protection for all USB signals to protect your devices from electrical damage. In addition, each USB port supports 5V output voltage to ensure reliable operation of connected devices. Configuration of the EX-6003HMVS is effortless thanks to the Windows-based GUI configuration program and the web-based configuration program, which provide user-friendly options tailored to your needs. The control function on each USB port and the control support API for application software integration make it easy to customise the EX-6003HMVS to your needs. For added convenience, DIP switches enable/disable each port for greater control over device connectivity. Compatibility with Windows 7, 8.x, 10 and 11 ensures seamless integration with existing systems. Detailed installation instructions and software can be downloaded from our website. Experience unrivalled reliability with the EX-6003HMVS. Your ultimate solution for remote USB connectivity in any environment! Share up to 4 USB 2.0 peripherals over your existing IP network Powerful USB extension, server over IP Four high speed, high performance USB 2.0 outputs Network Protocols: Emulates USB over TCP socket, so remote USB devices function as if they were locally connected to the host PC Supports 5V output power on each USB port No distance restrictions for USB peripherals on the network Can be used for MFPs (multifunction printers), USB printers, scanners, memory sticks, USB hard drives, keyboards, mice, etc. Intuitive user interface for easy configuration and firmware updates Power supply +9V to +24V via DC socket or terminal block USB ports can be individually switched on or off via DIP switch Packaging contents:EX-6003HMVS, Power Supply 12V/3A, DIN-Rail Kit, Quick Installation Guide

The EX-61004 is a multiprotocol RS-232/422/485 serial device server for integrating RS-232/422/485 serial devices, such as barcode scanners, weighing systems and payment terminals, into an IP-based Ethernet network. The serial devices are connected to the network and are available for sharing on the subnet and the Internet. Extensive network protocols such as TCP Server, TCP Client, UDP, VCOM, Remote Pair Master Slave, Modbus Server, Modbus Client and SNMP are supported. In addition, serial devices with remote pair master-slave mode can communicate with each other via peer-to-peer mode without the need for an intermediate PC or conversion software. With the Virtual COM (VCOM) software available for download, a perfectly migrated virtual serial port can be created on Windows computers for each serial device. Interface RS-232V.24/422/485 with 4 ports Interface and operation mode can be defined individually for each port Data bits: 5, 6, 7, 8 / Stop bits: 1, 2 Parity: None, Even, Odd Signals: RS-232: TXD, RXD, RTS, CTS, and GND RS-422: TXD+, TCD-, RXD+ RXD-, GND RS-485 2 wire: Data+, Data-, GND Operating modes: VCOM, MCP, TCP Server, TCP Client, UDP, Remote Pair mode, Modbus TCP Server, Modbus TCP Client, MQTT Point to point connection, no software needed Virtual-COM software (download) Robust metal housing Delivery contents:EX-61004, 4x cable adapter RJ45-DB9, power supply, wall mounting bracket, quick start guide

With the EX-6007PoE-WT, end devices such as IP-telephones, IP-cameras, WLAN access points, etc. can be supplied with a voltage of 52V. The EX-6007PoE-WT steps up a common 12-48VDC power input to 52VDC for PoE power source. With a slim, compact housing and a temperature range of -40ºF to +185ºF, it is ideal for use in industrial environments. The EX-6007PoE-WT operates as power source equipment (PSE) = 34.20 W for the powered device (PD) = 25.50 W. It provides the user with greater installation flexibility since the end device no longer has to be in the immediate proximity of an outlet. Using IEEE 802.3af/at Power over Ethernet (PoE), the EX-6007PoE-WT eliminates the need for a nearby power outlet and provides a reliable and user-friendly networking solution. This preserves the user's investment in LAN and Internet applications. Provides power to remote network devices Support a extended temperature field from -40°F to +185°F Support 10/100/1000 Base-T Ethernet standard Fully IEEE 802.3af/at compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W Maximum Power Delivered (PD): Type 1 = 12.95W / Type 2 = 25.50W LED indicator for PoE power supply status Built in step-up converter from 12~48 VDC to 52 VDC Power Input: 12V up to 48V (DC Jack or Terminal Block) Built in isolated DC to DC converter Wall or DIN-Rail mounting Slim, rugged metal housing for critical applications Packaging contents:EX-6007PoE-WT, Power Supply 12V/3A, DIN-Rail Kit, Manual

The Gigabit Ethernet PoE Injector EX-60310 in a robust metal housing allows end devices such as IP telephones, IP cameras, WLAN access points, etc. to be powered via the network cable. It supports the PoE standards IEEE 802.3af (PoE), IEEE 802.3at (PoE+ / Hi-PoE) and enables a maximum power output of up to 60W at the PoE port. Power is supplied via the +12~48V terminal block using an optional external power supply. The EX-60310 guarantees secure data transmission and excellent performance of up to 1000Mbps. The rugged metal housing and extended operating temperature range of -40°C to 80°C make it suitable for a wide range of applications, even in harsh environments. Supplied with a pre-assembled DIN rack kit and wall mounting bracket. Provides power to remote network devices 10/100/1000Base-T Gigabit Ethernet Fully compliant with IEEE 802.3af/at Power over Ethernet (PoE), Mode/Alternative A and B Maximum power delivered: 802.3af, Type 1: 15.40W (PSE), 12.95W (PD) 802.3at, Type 2: 30.00W (PSE), 25.50W (PD) 802.3at, Hi-PoE: 60.00W (PSE), 51.00W (PD) Plug and play, no configuration and installation required LED status indicators for power supply and PoE Terminal block for DC input, +12 V to +48 VDC Scales the input voltage to the PoE voltage range (42 - 57VDC) Rugged, compact metal housing, IP40 Includes DIN-Rail Kit and wall mounting bracket Extended operating temperature range from -40°C to +80°C Packaging contents:EX-60310, DIN-Rail Kit (pre-assembled), Wallmount Kit, Manual

The extremely compact industrial 5-port Gigabit Switch EX-62020PoE offers full Gigabit performance on all ports despite its small external dimensions. The downlink ports provide up to 30W each for connecting PoE power devices (PD) such as IP cameras or IP phones. Thanks to the rugged metal housing and the extended operating temperature range from -40°C to 80°C, it is suitable for a wide range of applications even in harsh environments. Power is supplied from the terminal block (12-48VDC) and can be redundant to reduce operational downtime. 5-Port 10/100/1000T Gigabit Ethernet Power up to 4 PoE-capable remote network devices, transfers data and power on one single cable Fully IEEE 802.3af compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W Maximum power delivered (PD): Type 1 = 12.95W / Type 2 = 25.50W Terminal block for redundant DC input, 2x 12V to 48VDC Converts the input voltage to the PoE range of 42 to 57VDC Compliant with IEEE 802.3af/at Power Over Ethernet (PoE), Mode/Alternative B Auto-MDI/MDIX eliminates the need for crossover cables Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex Supports jumbo frames up to 9KBytes Plug and play, no configuration and installation required Rugged, very compact metal housing, IP40 Extended operating temperature range from -40°C to +80°C Includes DIN-Rail Kit and wall mounting bracket Note:Refer to the STP cable earthing technical information. Packaging contents:EX-62020PoE, DIN-Rail Kit (pre-assembled), Wallmount Kit, Manual

The EX-6030 in metal housing allows you to connect your serial devices over the network (Ethernet) in the simplest way. You are no longer limited to a fixed distance, but can control any RS-232 peripheral device over the network. You can easily connect EX-6030 to the network with IP address (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP ping). The control is also possible via the enclosed and other Virtual Com Port Software. The COM ports are then entered in the device manager. The EX-6030 can be screwed directly to the wall or installed in a 19" rack with the DIN-Rail Kit. Interface: RS-232 V.24 Data Bits: 7, 8 Parity: none, even, odd RS-232 Signal: TxD, RxD, GND (Loop RTS, CTS, DTR, DSR, DCD) Ethernet Protocol: IP, TCP, DHCP Chipset: Samsung S3C4510B Packaging contents:EX-6030, Power Supply +5V / 2A, Wall Mount Kit, DIN-Rail Kit, Driver CD, Manual

The EX-6002 is designed to adopt your USB 2.0 devices such a external Enclosures, Flash Memory, USB Scanner or USB Printer via the network (10/100/1000 Mbps Ethernet) instantly. It delivers simple, reliable and cost-effective network connectivity for USB 2.0 devices. The EX-6002 can be simple integrated to the network. The IP address can be chosen manually. A Software for easy configuration of the devices is also included. The EX-6002 us a Metal case and the four USB 2.0 and also the power supply connector are screw lock. The EX-6002 support a 19” Rack with DIN-Rail Kit. Shares up to 4 USB 2.0 peripheral devices through your existing office or home IP network Powerful USB Extender, Server over IP or 4 port USB 2.0 Hub Four High-Speed USB 2.0 ports with high performance Supports fix IP and DHCP client No restriction of the distance for USB peripheral devices in the network Suitable for MFP (Multi-Function-Printer), USB-Printer, scanner, flash drives, USB hard drives, memory card reader, Keyboard, Mouse ect. Intuitive GUI allows easy configuration, monitoring, and firmware upgrade The EX-6002 can be used with TCP/IP or USB 2.0 but not both at the same time Chipset: Elite E3868M4 Attention, Windows 10/11 is not supported. Packaging contents:EX-6002, Power Supply +12V / 3A, Driver CD, Manual

The Gigabit Ethernet PoE Injector EX-60315 in a robust metal housing allows end devices such as IP telephones, IP cameras, WLAN access points, etc. to be powered via the network cable. It supports the PoE standards IEEE 802.3af (PoE), IEEE 802.3at (PoE+) and IEEE 802.3bt (PoE++) and enables a maximum power output of up to 90W at the PoE port. Power is supplied via the +12~48V terminal block using an optional external power supply. The EX-60315 guarantees secure data transmission and excellent performance of up to 1000Mbps. The rugged metal housing and extended operating temperature range of -40°C to 80°C make it suitable for a wide range of applications, even in harsh environments. Supplied with a pre-assembled DIN rack kit and wall mounting bracket. Provides power to remote network devices 10/100/1000Base-T Gigabit Ethernet Fully compliant with IEEE 802.3af/at/bt Power over Ethernet (PoE), Mode/Alternative A and B Maximum power delivered: 802.3af, Type 1: 15.40W (PSE), 12.95W (PD) 802.3at, Type 2: 30.00W (PSE), 25.50W (PD) 802.3bt, Type 3: 60.00W (PSE), 51.00W (PD) 802.3bt, Type 4: 90.00W (PSE), 71.00W (PD) Plug and play, no configuration and installation required LED status indicators for power supply and PoE Terminal block for DC input, +12 V to +48 VDC Scales the input voltage to the PoE voltage range (42 - 57VDC) Rugged, compact metal housing, IP40 Includes DIN-Rail Kit and wall mounting bracket Extended operating temperature range from -40°C to +80°C Packaging contents:EX-60315, DIN-Rail Kit (pre-assembled), Wallmount Kit, Manual Product Video EX-60315

The EX-6111-2PoE is a multi-protocol RS-232 serial Device Server designed to connect a RS-232 serial device, including point-of-sale systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial device is connected via Ethernet and available for sharing on the subnet and Internet. Remote configuration is done via extensive network protocols such as TCP server, TCP client, UDP, VCOM or serial Telnet/RFC2217. To ensure backward compatibility with legacy serial devices running existing COM port application software, the EX-6111-2PoE provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. The EX-6111-2PoE supports Power over Ethernet and can be powered directly from a PoE-compliant power supply unit (PSE) via the Ethernet cable. In addition, serial devices can communicate with each other in peer-to-peer mode without the need for an intermediate PC or conversion software. Interface: RS-232 V.24 15KV ESD Surge Protection for all serial signal Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space Fully IEEE 802.3af compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W RS-232 Signal: TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND Ethernet Protocol: TCP Server, TCP Client, UPD, VCOM, Serial Telnet/RFC2217 Direct connection with Socket Port Point to point connection, don’t need any software Virtual COM Software for download Voltage +5V configurable on pin 9 Rugged Metal Case with Wallmount and DIN-Rail Kit Delivery contents:EX-6111-2PoE, Power Supply 5V/4A, DIN-Rail Kit, Wallmount kit, Manual

The Gigabit Ethernet PoE+ Splitter EX-60326 splits the signal of a PoE supplier (PSE) into data and power supply and outputs both signals separately. This allows non-PoE-capable Ethernet end devices (IP cameras, WLAN access points...) to be connected to a PoE switch or other PSE and use their power supply. It is compliant with the PoE++ standard IEEE 802.3bt and provides a voltage of 12VDC with a power of max. 36W at the terminal block for feeding the end device. Thanks to the rugged metal housing and the extended operating temperature range from -40°C to 80°C, it is suitable for a wide range of applications even in harsh environments. Included in delivery is a DIN rack kit (pre-assembled) and a wall mounting bracket. Separates data and power supply of a PoE signal to power non-PoE capable Ethernet end devices Reduces system wiring, improves system stability/security, and reduces maintenance costs Voltage output via terminal block: 12VDC max. 36W Fully compliant with IEEE 802.3af/at/bt Power over Ethernet (PoE), Mode/Alternative A and B 10/100/1000Base-T Gigabit Ethernet Plug and play, no configuration and installation required LED status indicators for power supply and PoE Rugged, compact metal housing, IP40 Includes DIN-Rail Kit and wall mounting bracket Extended operating temperature range from -40°C to +80°C Packaging contents:EX-60326, DIN-Rail Kit (pre-assembled), Wallmount Kit, Manual

The EX-60340 compact industrial-grade media converter provides reliable conversion between copper and fiber optic environments. It is compatible with 10/100/1000Base-T with 60W PoE+ and dual mode 100/1000Base-X SFP (auto detection). The Ethernet port supports both half-duplex and full-duplex modes. Different types of optionally available SFP modules can be used depending on the requirements. Thanks to the rugged metal housing and the extended operating temperature range of -40°C to 75°C, it is suitable for a wide range of applications even in harsh environments. Power is supplied via the terminal block (12~48VDC). The EX-60340 supports Auto-MDI/MDI-X and Auto-Negotiation. Included is a DIN rail kit (pre-assembled) and a wall mounting bracket. 1x 10/100/1000T RJ45-Port, 1x 100/1000X SFP slot, auto detection Fully IEEE 802.3af/at Power Over Ethernet (PoE) compliant Maximum power delivered (PD): Type 1 = 12.95W / Type 2 = 25.50W / 4PPoE+ = 60W Fully IEEE 802.3af/at Power Over Ethernet (PoE) compliant Auto-MDI/MDIX eliminates the need for crossover cables Supports auto-negotiation and half/full duplex Power supply via terminal block 12 V to 48 VDC Power Booster generates PoE voltage range 46 - 57 VDC Rugged, very compact metal housing, IP40 Includes DIN-Rail Kit and wall mounting bracket Extended operating temperature range from -40°C to +75°C Packaging contents:EX-60340, DIN-Rail Kit (pre-assembled), Wallmount Kit, Manual

The EX-SFP-0055 SFP transceiver is a high-performance, cost effective module with a data rate of 1.25 Gbps and a transmission distance of up to 550 m with multimode fiber. The transceiver consists of three parts: a VCSEL laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA), and an MCU control unit. All modules meet laser safety class I requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. Data rate of 1.25Gbps 850nm VCSEL laser and PIN photodetector Compliant with SFP MSA and SFF-8472 with duplex LC socket Digital diagnostic monitoring, internal or external calibration 550m transmission with 50/125μm multimode fiber 330m transmission with 62.5/125μm multimode fiber Extended operating temperature range from -40°C to +85°C Other SFP modules available on request

The EX-61002 is a multiprotocol RS-232/422/485 serial device server for integrating RS-232/422/485 serial devices, such as barcode scanners, weighing systems and payment terminals, into an IP-based Ethernet network. The serial devices are connected to the network and are available for sharing on the subnet and the Internet. Extensive network protocols such as TCP Server, TCP Client, UDP, VCOM, Remote Pair Master Slave, Modbus Server, Modbus Client and SNMP are supported. In addition, serial devices with remote pair master-slave mode can communicate with each other via peer-to-peer mode without the need for an intermediate PC or conversion software. With the Virtual COM (VCOM) software available for download, a perfectly migrated virtual serial port can be created on Windows computers for each serial device. Interface RS-232V.24/422/485 with 2 ports Interface and operation mode can be defined individually for each port Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 2 Parity: None, Even, Odd Signals: RS-232: TXD, RXD, RTS, CTS and GND RS-422: TXD+, TCD-, RXD+ RXD-, GND RS-485: 2 wire - Data+, Data-, GND Operating modes: TCP Server, TCP Client, UPD, VCOM, Remote pair master-slave, Modbus Server, Modbus Client Point to point connection, no software needed Virtual-COM software (download) Robust metal housing with DIN-Rail Kit Delivery contents:EX-61002, 2x cable adapter RJ45-DB9, power supply, DIN-Rail Kit, quick start guide

The EX-61008 is a multiprotocol RS-232/422/485 serial device server for integrating RS-232/422/485 serial devices, such as barcode scanners, weighing systems and payment terminals, into an IP-based Ethernet network. The serial devices are connected to the network and are available for sharing on the subnet and the Internet. Extensive network protocols such as TCP Server, TCP Client, UDP, VCOM, Remote Pair Master Slave, Modbus Server, Modbus Client and SNMP are supported. In addition, serial devices with remote pair master-slave mode can communicate with each other via peer-to-peer mode without the need for an intermediate PC or conversion software. With the Virtual COM (VCOM) software available for download, a perfectly migrated virtual serial port can be created on Windows computers for each serial device. Interface RS-232V.24/422/485 with 8 ports Interface and operation mode can be defined individually for each port Data bits: 5, 6, 7, 8 / Stop bits: 1, 2 Parity: None, Even, Odd Signals: RS-232: TXD, RXD, RTS, CTS, and GND RS-422: TXD+, TCD-, RXD+ RXD-, GND RS-485 2 wire: Data+, Data-, GND Operating modes: VCOM, MCP, TCP Server, TCP Client, UDP, Remote Pair mode, Modbus TCP Server, Modbus TCP Client, MQTT Point to point connection, no software needed Virtual-COM software (download) Robust metal housing Delivery contents:EX-61008, 8x cable adapter RJ45-DB9, power supply, wall mounting bracket, quick start guide

The EX-6164 is a multiprotocol serial-to-Ethernet converter designed to connect RS-232 serial devices such as point-of-sale systems, barcode readers, sensors, gauges, weighing systems, CNC controllers, and PLCs to an IP-based Ethernet network.The converter acts as a “remote USB to serial converter” over Ethernet. With its Windows-based configuration GUI and virtual USB COM drivers, the system can instantly add fully functional serial ports over Ethernet from anywhere.With Ethernet being the most popular and flexible connection in this modern industry, the serial device converter, with its complete software and support for a wide range of selectable models, offers an ideal solution for adding serial devices and increasing the value of your applications. Interface: RS-232 V.24 15KV ESD Surge Protection for all serial signals Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space RS-232 Signal:     TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND Ethernet Interface: IEEE 802.3, IEEE 802.3u Works only with the Virtual COM Software for Windows Rugged Metal Case with Wall-Mount and Din-Rail Kit Packaging contents: EX-6164, Power Supply 12V/3A, Manual

The tiny industrial-grade 5-port Gigabit switch EX-62021 offers full Gigabit performance on all ports despite its small size. The rugged metal housing and extended operating temperature range of -40°C to 80°C allow it to be used also in harsh environments. Unlike conventional Ethernet switches, power is supplied via a USB-C port, making it extremely versatile. 5-port 10/100/1000T Gigabit Ethernet USB-C port for power supply via almost any USB power source (e.g. USB-hub) Auto-MDI/MDIX eliminates the need for crossover cables Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex Supports Jumbo Frames up to 9KBytes Plug and play, no configuration or installation required Rugged, very compact metal housing, IP40 DIN-Rail kit included Extended operating temperature range from -40°C to +80°C Packaging contents:EX-62021, DIN-Rail kit, USB-A to USB-C cable 90cm

The EX-60121 is a 10 Gigabit Ethernet card with an RJ45 port and Power over Ethernet (PoE) for the PCIe bus. It supports half and full duplex as well as auto-negotiation for automatic adjustment to the network speed (10/100/1000/10000 Mbps). Thanks to the integrated PoE functionality, connected PoE (PD) end devices (IP phones, IP cameras, etc.) can be powered via the network cable. The EX-60121 supports the PoE standards IEEE 802.3af (PoE), IEEE 802.3at (PoE+) and enables a maximum power output of up to 30W. Supports 10/100/1000/2500/5000/10000 Base-T Ethernet standard Fully compliant with IEEE 802.3af PoE (PSE) Type 1 = 15 W and IEEE802.3af PoE+ (PSE) Type 2 = 30 W Maximum power output (PD): Type 1 = 12.95 W / Type 2 = 25.50 W Fully compliant with PCI Express 4.0 Supports Jumbo Frame up to 16 Kbytes MSI, MSI-X, LSO, RSS and IPv4/IPv6 checksum offloads for high performance and low CPU usage Energy Efficient Ethernet (EEE), Wake On LAN and power management features PoE power via PCIe slot or SATA connection LED indicators for PoE, activity and data transfer mode Chipset: Marvell AQC113CS Packaging contents:EX-60121, low profile bracket, manual

The EX-6003HMVS-PoE is the ideal solution for instantly sharing USB devices over a network or the Internet. The USB server has four USB 2.0 ports with a data rate of 480 Mbps. The RJ45 Ethernet port provides a versatile network connection for smooth communication between devices. Using IEEE 802.3af/at compliant Power over Ethernet (PoE), the EX-6003HMVS-PoE eliminates the need for a nearby power outlet, providing a reliable and easy-to-use networking solution. Built to last, the EX-6003HMVS-PoE has a robust metal casing with wall mounting brackets to ensure optimum performance in harsh environments, and is supplied with a DIN-Rail kit. Its innovative networking protocols emulate USB over TCP socket and integrate remote USB devices as if they were locally connected to the host PC, providing unrivalled convenience and flexibility. The EX-6003HMVS-PoE provides 15KV ESD surge protection for all USB signals to protect your devices from electrical damage. In addition, each USB port supports 5V output voltage to ensure reliable operation of connected devices. Configuration of the EX-6003HMVS-PoE is effortless thanks to the Windows-based GUI configuration program and the web-based configuration program, which provide user-friendly options tailored to your needs. The control function on each USB port and the control support API for application software integration make it easy to customise the EX-6003HMVS-PoE to your needs. For added convenience, DIP switches enable/disable each port for greater control over device connectivity. Compatibility with Windows 7, 8.x, 10 and 11 ensures seamless integration with existing systems. Detailed installation instructions and software can be downloaded from our website. Experience unrivalled reliability with the EX-6003HMVS-PoE. Your ultimate solution for remote USB connectivity in any environment! Share up to 4 USB 2.0 peripherals over your existing IP network Powerful USB extension, server over IP Four high speed, high performance USB 2.0 outputs Network Protocols: Emulates USB over TCP socket, so remote USB devices function as if they were locally connected to the host PC Power over Ethernet function eliminates the need for an additional power supply unit Supports 5V output power on each USB port No distance restrictions for USB peripherals on the network Can be used for MFPs (multifunction printers), USB printers, scanners, memory sticks, USB hard drives, keyboards, mice, etc. Intuitive user interface for easy configuration and firmware updates Power supply +9V to +24V via DC socket or terminal block USB ports can be individually switched on or off via DIP switch Packaging contents:EX-6003HMVS-PoE, Power Supply 12V/3A, DIN-Rail Kit, Quick Installation Guide

The EX-6003HMVS-PoE is the ideal solution for instantly sharing USB devices over a network or the Internet. The USB server has four USB 2.0 ports with a data rate of 480 Mbps. The RJ45 Ethernet port provides a versatile network connection for smooth communication between devices. Using IEEE 802.3af/at compliant Power over Ethernet (PoE), the EX-6003HMVS-PoE eliminates the need for a nearby power outlet, providing a reliable and easy-to-use networking solution. Built to last, the EX-6003HMVS-PoE has a robust metal casing with wall mounting brackets to ensure optimum performance in harsh environments, and is supplied with a DIN-Rail kit. Its innovative networking protocols emulate USB over TCP socket and integrate remote USB devices as if they were locally connected to the host PC, providing unrivalled convenience and flexibility. The EX-6003HMVS-PoE provides 15KV ESD surge protection for all USB signals to protect your devices from electrical damage. In addition, each USB port supports 5V output voltage to ensure reliable operation of connected devices. Configuration of the EX-6003HMVS-PoE is effortless thanks to the Windows-based GUI configuration program and the web-based configuration program, which provide user-friendly options tailored to your needs. The control function on each USB port and the control support API for application software integration make it easy to customise the EX-6003HMVS-PoE to your needs. For added convenience, DIP switches enable/disable each port for greater control over device connectivity. Compatibility with Windows 7, 8.x, 10 and 11 ensures seamless integration with existing systems. Detailed installation instructions and software can be downloaded from our website. Experience unrivalled reliability with the EX-6003HMVS-PoE. Your ultimate solution for remote USB connectivity in any environment! Share up to 4 USB 2.0 peripherals over your existing IP network Powerful USB extension, server over IP Four high speed, high performance USB 2.0 outputs Network Protocols: Emulates USB over TCP socket, so remote USB devices function as if they were locally connected to the host PC Power over Ethernet function eliminates the need for an additional power supply unit Supports 5V output power on each USB port No distance restrictions for USB peripherals on the network Can be used for MFPs (multifunction printers), USB printers, scanners, memory sticks, USB hard drives, keyboards, mice, etc. Intuitive user interface for easy configuration and firmware updates Power supply +9V to +24V via DC socket or terminal block USB ports can be individually switched on or off via DIP switch Packaging contents:EX-6003HMVS-PoE, DIN-Rail Kit, Quick Start Guide

The EX-60328 USB-C Gigabit Ethernet PoE++ splitter and network adapter offers an outstanding variety of possible uses.It splits the signal from a PoE (Power over Ethernet) switch into data and power, providing up to 60 W of power via USB Power Delivery (PD) at the USB-C port. At the same time, the USB-C connection acts as a network adapter, enabling the connected computer to access the Ethernet network. Furthermore, the SFP slot enables integration into a fibre optic network. Suitable SFP transceivers are available as accessories. Thanks to its robust metal housing, pre-assembled DIN-Rail kit and supplied wall mounting bracket, the EX-60328 can be used in a wide range of applications, even in harsh environments. PoE++ splitter, network card and USB-C charger in one compact, industrial-grade device Ideal, for example, for system administrators for direct connection of notebooks in server cabinets Splits the PoE signal to output the Gigabit network signal at the RJ45 port and power at the USB-C port Fully compliant with IEEE 802.3af/at/bt Power over Ethernet (PoE), Mode/Alternative A and B The integrated network card integrates devices connected to the USB-C port into the network Can be used as a USB-C charger with USB Power Delivery (PD) up to 60 W SFP slot for integration into a fibre optic network Reduces system cabling, improves system stability/security and reduces maintenance costs Plug and play, no configuration or installation necessary Robust, compact metal housing, IP30 Includes DIN-Rail kit and wall mounting bracket Packaging contents:EX-60328, DIN-Rail Kit (pre-assembled), Wallmount bracket, Manual

The EX-6201 is an industrial 5-port Ethernet unmanaged switch in a metal housing. It offers increased operational reliability thanks to the redundant power supply of 2x 12V - 48VDC via a terminal block. 5-port 10/100Tx Fast Ethernet Auto-MDI-MDIX, no "crossover cable" needed Plug and Play, no configuration and installation required Terminal block for redundant DC input, 2x 12V to 48VDC Built-in relay output warning for power failure Robust metal housing, IP30 DIN-Rail Kit and metal plate for wall mounting Operating temperature range from -10°C to +65°C Packaging contents:EX-6201, RJ45 Protection caps, Wall mounting brackets, DIN-Rail Kit, Manual

The EDS-208 supports IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDIX auto-sensing RJ45 ports. The EDS-208 is rated to operate at temperatures ranging from -10 to 60°C, and is rugged enough for any harsh industrial environment. The switches can be easily installed on a DIN rail as well as in distribution boxes. The DIN-rail mounting capability and the IP30 housing with LED indicators make the plug-and-play EDS-208 switches reliable and easy to use. 10/100BaseT(X) (RJ45 connector) IEEE802.3/802.3u/802.3x support Broadcast storm protection DIN-rail mounting ability Package contents:EDS-208, quick installation guide